Contact Us
Tel: +86-377-63707988
Fax: +86-377-63208520
E-mail: jingde@jdbrewtech.cn
Address: middle of Weishi Road,Li River Ecological Industrial Park , Nanyang City,Henan Province,China
1000L Brewhouse

1000L Brewhouse

Boiled hot wort after completion, through the replacement of cooling water to achieve cooling system recovery system, continuous use to the second production process, reducing production energy consumption, heating time save 30 minutes, can achieve the second production requirements .

There are two specifical advantage for our 1000L brewhouse

1.Heat recovery system

Boiled hot wort after completion, through the replacement of cooling water to achieve cooling system recovery system, continuous use to the second production process, reducing production energy consumption, heating time save 30 minutes, can achieve the second production requirements . At the same time can achieve the reuse of water resources.

Production process can also be reduced by 30 minutes, speed up production, full load operation, can produce more than 2 batches, reduce production costs


2.The rake knife with the own lift and bad grain out function

Small beer equipment filter cutter with a lifting function, a bad function. A large number of people to reduce the manual labor intensity.

The whole system uses PLC control, lifting accuracy can reach millimeter level. Double security control. Ascent and descent can rorate at the same time.
Automatically out of bad function, filtering is completed, reverse, can automatically out of the bad. Greatly reduce the amount of labor.
Can realize the automation control.

image001.jpg

image003.jpg

 

Beer Fermenting of 1000L brewhouse

1000L fermentation tanks with top manhole

Doule cooling jacket beer fermentation tanks,bright beer tank.with dry hop port and the tinatium road.

The cone for 60/75/90 depend on the customers'lover.

Top or side manhole,the display level tube for the tanks.

The quantity depend on the customers,or we suggest according to the daily production.

The testing pressure 0.3mpa.working pressure 0.15-0.2mpa

 

Our advantage of producting the tanks of 1000L brewhouse

1.Pickling passivation: the inside of the tank can be pickled passivation treatment: do not change the workpiece color, size and thickness of the appearance. Corrosion resistance is stronger

2.Polyurethane insulation: through the constant temperature foam environment, high pressure grab, quantitative feed control, insulation layer thickness 80MM, insulation thickness of 55MM or more, closed porosity greater than 90%, density 60KG / m3 so the equipment will not appear outside the condensate, or In winter, the design flaw of fermentation temperature is not reached

3.Tank welding:Tank tank we use double-sided welding technology, the implementation of double-sided welding; under the cone with spin technology R25 degrees, can withstand greater pressure.

4.Nondestructive testing: the use of non-damage or does not affect the use of stainless steel tank was tested performance, does not harm the internal structure of the object under the premise of the use of internal structural abnormalities or defects caused by the existence of heat, sound, light, electricity, Changes in the type, nature, quantity, shape, position, size, distribution and variations of the structure, nature, state and defects of the specimen and the surface of the specimen by means of modern technical and equipment, in a physical or chemical manner. Check and test the method. Can not observe the internal processing defects for quality control, tank quality is more reliable, extend the service life of the equipment.



Hot Tags: 1000L brewhouse, China, manufacturers, factory
Inquiry