Contact Us
Tel: +86-377-63707988
Fax: +86-377-63208520
E-mail: jingde@jdbrewtech.cn
Address: middle of Weishi Road,Li River Ecological Industrial Park , Nanyang City,Henan Province,China
Ale Craft Beer Making Kit In Pub

Ale Craft Beer Making Kit In Pub

Ale craft beer making kit in pub Description 1. Fully insulated beer making kit includes mash tun and brew kettle mounted on a modular, radius edge, and stainless steel under-frame, designed for easy and efficient installation in almost any structure. 2. Grain out door is positioned at the...

Ale craft beer making kit in pub

Description

1. Fully insulated beer making kit includes mash tun and brew kettle mounted on a modular, radius edge, and stainless steel under-frame, designed for easy and efficient installation in almost any structure.

2. Grain out door is positioned at the optimal level for off-loading into standard 55-gallon drums, for easy and efficient clean up the ale making kit.

3. This is in contrast to some competitive craft beer making kits brewhouses with valves and electronics scattered aimlessly around the system, dead end piping runs and little apparent devotion to the process of craft brewing. 

image001.jpg

Craft beer equipment for pub

Milling System

Capacity

200KG/H

Index

Stainless Steel Outshell,Double Roller,Alloy rollers

Fermenter

Material

SUS304 316 Or red copper

Volume

3bbl,6bbl

Thickness

Interior thickness: 3.0mm;

Exterior 2.0mm;

Welding

100% TIG welding with pure argon gas shield

Interior Finish

Overall polishing to 0.4-0.6 μm without dead corner

Temperature sensor

PT100

Cooling media

Glycol water or alcohol water.

Cooling jacket

Dimpled plate on cone and body

Insulation

Polyurethane-thickness:80mm.

Spraying ball

360° coverage CIP Spraying ball

Dry hopping port and
safety valve

On the top of tank

Pressure Test

Stringent tank and Jacket leakage test by water and pressured gas
Test Pressure:0.3 Mpa.Three times before shipment

Discharge

Tri clamp discharge arm with butterfly valve

Glycol
Cooling System

Glycol water Tank

10BBL

Chiller

3HP

CIP System

Two tanks with trolley

50L

Fermentating system

1. Beer making kit fermenting system consists of Fermentation Tank and Bright Beer Tank. Fermentation Tank structure and design differs depending on fermentation process. The normal ale making kit fermentation tank structure is dish head up and cone down, the craft beer mking kit is equipped with cooling installation, there is a cooling jacket on tank cone section, columnar part has two or three cooling jackets. This not only can meet the relevant requirements of cooling, guarantee cooling rate of fermentation tank, also help to precipitation and storage the yeast.

2. Standard stainless steel conical cylindrical fermentation tanks 

3. Single size as brewhouse is common used in restaurant

4. Tanks quantity is exactly calculated by fermentation cycle for various beers

5. All manhole, valves, pressure gauges, fittings etc are included



Hot Tags: ale craft beer making kit in pub, China, manufacturers, factory
Inquiry